1.Description PC based code reader and live data scan tool for Volvo cars including 800 Series, C70, S40, V40, S70, V70, 900 series,
S90 and V90 Features: New Design! 232 Chipset based design Works excellently volvo fault code reader 1.3 serial version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming Supported Software: OnBoardDiagnostics Versions: 1.3 Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC What can this interface be used for? This interface (adapter) is used as an interface and an Serial cable to connect a volvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from Volvo FCR. Volvo FCR is a software
program that turns
your PC into a sophisticated Volvo diagnostic tool.
2.Product Features and Benifits -Supports Volvo FCR version 1.3 or older -Precision-molded diagnostic connector made to fit all volvo vehicles, even those with "tight" trim around diagnostic socket -LED light indicating communication status -High quality UL certified Serial Cables (equivalent to CE) -Built-in, Electronic Protection from the "Aftermarket Radio Problem"
What is Volvo FCR? Volvo FCR is a Windows-based Diagnostic Software for Volvo that emulates the functions of the dealers` very expensive proprietary scan tools. As the
first aftermarket Volvo-Tool, it has the following features: Volvo control module coverage includes: -Engine - Petrol and br />-ABS -Automatic transmission -SRS - airbag and other protection systems -Driver and passenger seat memories -Instruments, including service light reset -Climate control - air conditioning -Immobilizer -Alarm -Road traffic information -Additional heater
How to Use? -For laptops and PCs, download the shareware 1.3 -Run it and follow the prompts to allow it to install itself. Note: You must install volvo FCR on your PC`s hard disk -- it will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the
distribution file from a PC with internet access to another PC that does not have internet access. -Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232)
(or USB port )on your PC and the other end directly into the OBD-II port present passenger vehicles. -Turn the car`s ignition switch ON. No need to start the engine. -Start the Volvo program, -Now it works. Make sure the software can reliably access all the control modules that it should in your car. What are the system and computer requirements? -A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC`s, but anything
less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB. What are the system and computer requirements? -A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC`s, but anything
less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.
3.Package Including 1pc x VOLVO Serial Cable 1pc x CD Drive
Benz Star | Volvo VIDA DiCE | vas 5054A | Sbb key programmer | OBD2 code scanner | MB star c3 | Lexia-3
Copyright(C)2010 www.autokcan.com All right reserved.
Email:info@autokcan.com MSN:autokcan@live.cn Skype:autokcan